离型胶片 | PET RELEASE FILM

1)Matte, cool peel release film for screen printing/offset printing (back coating)

Product specification:
48*64cm,39*54cm,44*60cm

Thickness: 70um,75um,100um(Special specifications can be customized)

2) application manual:
1. Apply to printing:Only suitable for the matte and cool peel of screen printing products.
2. Applicable heat transfer materials: cotton, chemical fiber, cotton blended fabric, EVA, non-woven fabrics, leather and other heat resistant fabric
3.Peeling method: cold peeling

大家都在看

ꄴ上一个：无

ꄲ下一个：无

Products using the matters needing attention

1. before transfer,keep printing substrates clean and tidy;

2. At printing and production, avoid contact with sharp objects, in order to avoid scratches, impact effect

3. At printing and production, avoid contact with hot objects

4.When printing,pay attention to the light to take and light put, prevent scratch color printing design;

5. Putting it together should not exceed 20 after printing offset printing products, prevent print the stick.And enter pump suction wet wet room 12 h about 40 ℃,after the offset printing ink drying,then screen printing.

6. This product is applicable to water, oily silk screen printing ink

7.After Silk screen printing baking temperature between 50 ℃ to 65 ℃ advisable, to prevent high temperature lead to slight deformation generates set of bit of film not accurate

8.Before transfer the image,cut out the other parts of the blank and with 2 mm border.

9.Transfer temperature:130℃-150℃,Trnsfer time:6-15s Press:20-30 pounds

10. Machine time out, lift or move the machine heating panel, after product cooling tore away from the film, the effect is better.